Put on your headphones for the interactive video tour!
Turn off sound
Turn on sound
1Unique product advantages
2Time saving during assembly
3Extremely low pressure loss
4More information
5Optimised flow properties

Viega Smartpress

Advanced multilayer piping system with minimal pressure loss.

Pull the circle up to start the tour!

  • Innovative material combination
  • Sealing face without O-ring
  • Maximum safety thanks to the SC-Contur
  • Flow-optimised geometry

Innovative material combination

The patented connection between the metal base unit and the PPSU support body combines the best of metallic and plastic piping systems. This enables multilayer pipes to be connected with low pressure losses and minimum constrictions.

Sealing face without O-ring

Compared with conventional connectors, which only provide a point seal by means of an O-ring, Viega Smartpress incorporates a sealing contour that seals across the entire surface along the entire length of the support body.

Maximum safety thanks to the SC-Contur

The Viega Smartpress connectors feature the patented SC-Contur, which ensures that any inadvertently unpressed connectors are immediately identifiable during a leak test. The windows in the press sleeve enable easy inspection of the insertion depth.

Flow-optimised geometry

We achieve this with our innovative production process involving stainless steel shaped and gunmetal parts, thus ensuring minimum pressure losses and smaller dimensions.

Time saving during assembly

Cut to length. Calibration no longer required. Push on. Press.
Comparison:
Calibration is omitted

Simple and quick assembly is a particular strength of Viega Smartpress. A long-lasting and secure connection is created in just three work steps: Cut off pipe, push on connector, press – that’s it. Laborious preparatory work such as calibrating or chamfering the pipe ends or additional widening are dispensed with. As a result, Viega Smartpress delivers time savings of up to 30%.

Viega Smartpress
Viega Smartpress
Installation completed in 00:15:89
Standard connector
Standard connector
Installation completed in 00:25:89

Optimised flow properties

Comparison:
Significantly lower pressure losses

The flow simulation clearly shows: 
Flow-optimised Viega Smartpress connectors compared with standard connectors (below) made of plastic or brass.

Standard connector

Flow rate

Flow-optimised geometry

Minimum constriction

Extremely low pressure loss

Comparison:
Significantly higher pressure with the same dimensions

For the same flow volume, a Smartpress connector by Viega cuts pressure losses by up to 80% compared with standard connectors. This allows the use of smaller dimensions throughout the installation and provides improved convenience.

Viega Smartpress

Zeta:

2.7

Pressure loss:

mbar

Standard connector

Zeta:

13.9

Pressure loss:

mbar

Try it by yourself! Flow rate: 0 [m/s]

Viega
Smartpress

Advanced multilayer piping system with minimal pressure loss.

x

Viega Smartpress

Advanced multilayer piping system with minimal pressure loss.

1
2
3
4

Unique product advantages

Reasons for Viega Smartpress.

  • 1. Innovative material combination

    The patented connection between the metal base unit and the PPSU support body combines the best of metallic and plastic piping systems. This enables multilayer pipes to be connected with low pressure losses and minimum constrictions.

  • 2. Sealing face without O-ring

    Compared with conventional connectors, which only provide a point seal by means of an O-ring, Viega Smartpress incorporates a sealing contour that seals across the entire surface along the entire length of the support body.

  • 3. Maximum safety thanks to the SC-Contur

    The Viega Smartpress connectors feature the patented SC-Contur, which ensures that any inadvertently unpressed connectors are immediately identifiable during a leak test. The windows in the press sleeve enable easy inspection of the insertion depth.

  • 4. Flow-optimised geometry

    We achieve this with our innovative production process involving stainless steel shaped and gunmetal parts, thus ensuring minimum pressure losses and smaller dimensions.

Time saving during assembly

Simple and quick assembly is a particular strength of Viega Smartpress. A long-lasting and secure connection is created in just three work steps: Cut off pipe, push on connector, press – that’s it. Laborious preparatory work such as calibrating or chamfering the pipe ends or additional widening are dispensed with. As a result, Viega Smartpress delivers time savings of up to 30%.

Optimised flow properties

The flow simulation clearly shows: 
Flow-optimised Viega Smartpress connectors compared with standard connectors (below) made of plastic or brass.

Standard connector

Flow rate

0.0 2.5 5.0 7.5 10.0

Viega Smartpress

Flow rate: 0.87 [m/s]
Zeta: 2.7
Delta P: 10 mbar

Standard connector

Flow rate: 0.87 [m/s]
Zeta: 13.9
Delta P: 53 mbar

Extremely low pressure loss

For the same flow volume, a Smartpress connector by Viega cuts pressure losses by up to 80% compared with standard connectors. This allows the use of smaller dimensions throughout the installation and provides improved convenience.

Viega
Smartpress

Advanced multilayer piping system with minimal pressure loss.

For drinking water and heating installations

Viega Smartpress is a plastic pipe system that minimises pressure losses and is designed for use in drinking water and heating installations. With dimensions of 16 to 63 mm, it is not only suitable for conventional floor installation, but also for use in installation risers and distribution lines.

Viega Smartpress
In heating installations
Back

  • Viega Smartpress
    In heating installations

    Diversity that can be warmly recommended.

    It goes without saying, that Viega Smartpress, with its high quality connectors and flexible, while at the same time dimensionally stable pipes, is ideally suited for heating installations. It not only saves costs and time here, but with its optimum adapters, the cross T-piece and a pre-insulated pipe, it also offers intelligent components that are perfectly matched to each other and therefore which master any connection variant involved.

  • Never found wanting for the ideal connection

    With a total of three pre-insulated connection blocks, Viega Smartpress really can deal with any connection required – it doesn’t matter if they come out of the wall or the floor. 

  • Manifold installation

    A stainless steel manifold with matching connection screw fittings is available for central distribution of heat to the radiators. This in turn means that radiators can be connected without any additional connectors into the floor inexpensively and safely.
24

Viega Smartpress
In drinking water installations
Back

  • Viega Smartpress
    In drinking water installations

    Unconditional drinking water hygiene.

    With a full range, Viega Smartpress always offers a perfect solution for not only every possible construction-site situation, but also for the various requirements placed on a drinking water installation. This applies regardless of whether the installation plant involved is a modern ring or series one, or a classical T-piece or distributor installation plant. Naturally, Viega Smartpress also complies with stringent requirements and legal regulations for the preservation of drinking water quality.

  • The future of drinking water installation: Ring and series pipelines

    A constant exchange of water in the drinking water installation is made available through series and ring systems. This means that, not only in particularly hygienically-sensitive buildings – such as hospitals and care facilities, but also in standard housing construction, the regular withdrawal of water at only one outlet point can help to keep the risk of stagnation and germination low.
24

Calculate pressure losses
ZETA-CALCULATOR
Back

  • Calculate pressure losses
    ZETA-CALCULATOR
24
Viega Smartpress

Zeta:

2.7

Pressure loss:

mbar

Standard connector

Zeta:

13.9

Pressure loss:

mbar

Flow rate: 0 [m/s]

  • Elbow 90°

  • T-piece

  • Double wall panel

  • Wall plate

Viega Smartpress
In heating installations

Diversity that can be warmly recommended.

It goes without saying, that Viega Smartpress, with its high quality connectors and flexible, while at the same time dimensionally stable pipes, is ideally suited for heating installations. It not only saves costs and time here, but with its optimum adapters, the cross T-piece and a pre-insulated pipe, it also offers intelligent components that are perfectly matched to each other and therefore which master any connection variant involved.

  • 1. Never found wanting for the ideal connection

    With a total of three pre-insulated connection blocks, Viega Smartpress really can deal with any connection required – it doesn’t matter if they come out of the wall or the floor. 

  • 2. Manifold installation

    A stainless steel manifold with matching connection screw fittings is available for central distribution of heat to the radiators. This in turn means that radiators can be connected without any additional connectors into the floor inexpensively and safely.

Viega Smartpress
In drinking water installations

Unconditional drinking water hygiene.

With a full range, Viega Smartpress always offers a perfect solution for not only every possible construction-site situation, but also for the various requirements placed on a drinking water installation. This applies regardless of whether the installation plant involved is a modern ring or series one, or a classical T-piece or distributor installation plant. Naturally, Viega Smartpress also complies with stringent requirements and legal regulations for the preservation of drinking water quality.

  • 1. The future of drinking water installation: Ring and series pipelines

    A constant exchange of water in the drinking water installation is made available through series and ring systems. This means that, not only in particularly hygienically-sensitive buildings – such as hospitals and care facilities, but also in standard housing construction, the regular withdrawal of water at only one outlet point can help to keep the risk of stagnation and germination low.

Viega Smartpress

Also means: Connecting the finest materials.
Back

Stainless steel, gunmetal and PPSU – ideal for all drinking water.

The Viega Smartpress system combines the best and most famous materials in a single system:

Stainless steel and gunmetal, familiar from metal piping systems such as Sanpress Inox or Profipress, as well as the high-performance plastic PPSU and the pipes made of electron-beam cross-linked PE that have been tried and tested over many decades. All materials are suitable for all types of drinking water, resistant to dezincification and meet the hygiene requirements of the accrediting authorities.
https://smartpress.viega.com/static/products/03-01-Werkstoffe-Gas.jpg

VIEGA Smartpress
Quick assembly
Back

Time-consuming calibration no longer required: simply shorten, plug-on, press and it’s done.

None of the Viega Smartpress connectors in dimensions 16 to 63 mm require an O-ring. A major advantage during installation: This is because, complex calibration is no longer required. Any unintentional damage to the O-ring, the greater susceptibility for damage and the reduced internal diameter are all disadvantages that now no longer apply because the need for an O-ring has been dispensed with. This in turn speeds up installation while also making it permanently reliable. Naturally, the Viega Smartpress connectors also come with the patented SC-Contur, which immediately and reliably highlights any positions that have inadvertently remained unpressed.
https://smartpress.viega.com/static/products/03-02-Schnelle-Montage.jpg

Viega Smartpress

The connector in detail
Back

Viega Smartpress is the next major step in drinking water installation.

The Viega Smartpress connector combines know-how gathered over many years, tried-and-tested technology and high quality, corrosion resistant and durable materials in a single connector. The result is an innovative piping system, which enables safe drinking water and heating installations to be made through a combination of fast processing with minimum pressure losses.
https://smartpress.viega.com/static/products/Verpressung-T-Stuckv3.jpg

Viega Smartpress

The pipe
Back

Retains its shape and resists buckling.

The Viega Smartpress pipe excels with maximum dimensional stability while - at the same time - offering lots of flexibility. In smaller dimensions up to 32 mm, it can be easily bent by hand and matched perfectly to the individual installation conditions. Viega Smartpress pipes are also available in dimensions of 16 to 63 mm. To guarantee premium quality, all the system components and all the Viega Smartpress pipes are made by Viega itself – and, naturally, they all fulfil all normative specifications, while also having the necessary certifications.
https://smartpress.viega.com/static/products/pexfit_biegemaschine.jpg

Stainless steel, gunmetal and PPSU – ideal for all drinking water.

Stainless steel and gunmetal, familiar from metal piping systems such as Sanpress Inox or Profipress, as well as the high-performance plastic PPSU and the pipes made of electron-beam cross-linked PE that have been tried and tested over many decades. All materials are suitable for all types of drinking water, resistant to dezincification and meet the hygiene requirements of the accrediting authorities.

None of the Viega Smartpress connectors in dimensions 16 to 63 mm require an O-ring. A major advantage during installation: This is because, complex calibration is no longer required. Any unintentional damage to the O-ring, the greater susceptibility for damage and the reduced internal diameter are all disadvantages that now no longer apply because the need for an O-ring has been dispensed with. This in turn speeds up installation while also making it permanently reliable. Naturally, the Viega Smartpress connectors also come with the patented SC-Contur, which immediately and reliably highlights any positions that have inadvertently remained unpressed.

The Viega Smartpress connector combines know-how gathered over many years, tried-and-tested technology and high quality, corrosion resistant and durable materials in a single connector. The result is an innovative piping system, which enables safe drinking water and heating installations to be made through a combination of fast processing with minimum pressure losses.

The Viega Smartpress pipe excels with maximum dimensional stability while - at the same time - offering lots of flexibility. In smaller dimensions up to 32 mm, it can be easily bent by hand and matched perfectly to the individual installation conditions. Viega Smartpress pipes are also available in dimensions of 16 to 63 mm. To guarantee premium quality, all the system components and all the Viega Smartpress pipes are made by Viega itself – and, naturally, they all fulfil all normative specifications, while also having the necessary certifications.

Viega Smartpress Downloads

Our brochure contains more detailed information about Viega Smartpress.